可分解均衡函数均衡力度分析

证明了惩罚力度越大的均衡函数得到的变权向量构建的变权决策模型越偏于保守;而激励力度越大的均衡函数得到的变权决策模型越偏于乐观,这些结果与均衡函数的原始含义是一致的.最后,详细分析了几类常见的可分解均衡函数的惩罚力度和激励力度随着参数的变化情况.     

What can statistical process control show us about ionization chamber stability?

PurposeStatistical process control (SPC) has been shown to be a suitable tool for medical physicists to monitor quality and keep variability low and within specifications. We report our findings regarding ionisation chamber stability in our department when using a radioactive stability check device (RSCD) and we compare them with similar previously published records, including calibration results.MethodsWe retrospectively studied the stability of a PPC 40 parallel-plate chamber, and two Farmer chambers (FC65-G and FC65-P) by checking them with dedicated RSCDs. We analysed the data following SPC methodology which includes plotting I-MR control charts, monitoring out-of-control observations, calculating process capability ratios (C_p), and estimating conformance to specifications. We also estimated the C_p and adherence to specifications of previously published data.ResultsThe PPC40 chamber hardly went out of the control limits over the whole six-year period assessed. However, Farmer chamber verifications drifted in opposite directions in phase II, and the deviations observed did not agree with their calibration records, which only increased by a maximum of 0.5%. In phase I the most unstable chamber was the FC65-P with a C_p equal to 0.9 at a specification level of ±1%. The PPC40 chamber was stable to within a maximum C_p of 1.3. Several sets of analysed data, including ours and those from other authors, fitted well within these limits: within ±1.9% and ±1.5% for a C_p of 1.5 and 1.33 respectively.ConclusionsSPC with constant long-term RSCD checking gave us a meaningful plot of the instability of our ionisation chambers. Although a period of two years between calibrations should not be surpassed, in the interim this check can conform to specifications of ±1.5%.     

Co1−xFe2+xO4 (x = 0.1, 0.2) anode materials for rechargeable lithium-ion batteries

A cobalt-poor or iron rich bicomponent mixture of Co_0.9Fe_2.1O₄/Fe₂O₃ and Co_0.8Fe_2.2O₄/Fe₂O₃ anode materials have been successfully prepared using simple, cost-effective, and scalable urea-assisted auto-combustion synthesis. The threshold limit of lower cobalt stoichiometry in CoFe₂O₄ that leads to impressive electrochemical performance was identified. The electrochemical performance shows that the Co_0.9Fe_2.1O₄/Fe₂O₃ electrode exhibits high capacity and rate capability in comparison to a Co_0.8Fe_2.2O₄/Fe₂O₃ electrode, and the obtained data is comparable with that reported for cobalt-rich CoFe₂O₄. The better rate performance of the Co_0.9Fe_2.1O₄/Fe₂O₃ electrode is ascribed to its unique stoichiometry, which intimately prefers the combination of Fe₂O₃ with Co_1−xFe_2+xO₄ and the high electrical conductivity. Further, the high reversible capacity in Co_0.9Fe_2.1O₄/Fe₂O₃ and Co_0.8Fe_2.2O₄/Fe₂O₃ electrodes is most likely attributed to the synergistic electrochemical activity of both the nanostructured materials (Co_1−xFe_2+xO₄ and Fe₂O₃), reaching beyond the well-established mechanisms of charge storage in these two phases.     

基于非齐次复合Poisson过程的正交异性钢桥面板细节疲劳裂纹随机扩展研究

传统的正交异性钢桥面板疲劳损伤评估常采用确定性和可靠性分析方法,忽略了疲劳裂纹扩展的随机性影响,针对这一问题,提出钢桥面板细节疲劳随机扩展分析方法。本文以南溪长江大桥为工程背景,基于长期车辆荷载监测数据,建立了车辆荷载非齐次复合Poisson过程模型。建立钢桥面板有限元模型,采用瞬态分析方法将随机车辆荷载转化成细节疲劳应力,基于线弹性断裂力学理论推导U肋-顶板焊接细节疲劳裂纹扩展时变微分方程,实现宏观关系式疲劳应力幅次数-疲劳损伤至微观表达式应力时间序列-疲劳损伤转换,讨论了车载次序及超载对疲劳裂纹扩展的影响。研究结果表明,非齐次复合泊松过程模型能够较好描述随机车流运营状态,车辆荷载的次序对疲劳裂纹扩展速率的影响不可忽略,重车排序靠前时能够促使疲劳裂纹扩展增速,南溪长江大桥细节点的车辆超载迟滞效应修正系数取值0.804。     

大型激光装置束间能量平衡能力综合分析方法

 针对大型激光装置输出能量平衡能力,建立了束间均方根分析方法。构建了大型激光装置的光束能量观测数据变换过程,得到服从近似正态分布的变换数据,从而建立简便的束间能量平衡能力的均方根计算方法;基于全控图和选图,针对装置能量平衡能力短期变化提出均方差控制图,并定义装置平均失效强度函数,用于描述装置整体的能量平衡能力长期变化趋势。通过对调试数据的分析,验证了综合分析方法的可视性和高效性。     

一种提高相对论返波管功率容量的方法

 对相对论返波管实验中射频击穿现象进行了分析和数值模拟研究,发现谐振反射器和慢波结构的局部场增强诱导了场致电子发射,引起了金属表面的射频击穿,通过研究分析,提出采用分布反馈式谐振反射器,并采用梯形倒角非均匀慢波结构替换正弦慢波结构的方法来抑制射频击穿。数值模拟研究表明,在微波功率2 GW时,改进后的反射器最大场强由1.4 MV/cm降低为570 kV/cm,慢波结构表面最大电场由1.1 MV/cm降低到780 kV/cm。改进后的结构在二极管电压765 kV时获得了微波功率2.2 GW、脉宽45 ns的实验结果,微波功率和脉宽得到显著提升。     

1.8m望远镜变形次镜波前拟合能力分析

波前拟合能力分析是变形次镜研制工作的重要组成部分,是基于变形次镜的新型自适应光学系统研制的重要基础.以拟合误差为评价标准,采用有限元计算所得驱动器影响函数对1.8 m望远镜变形次镜四个备选方案进行了泽尼克(Zernike)多项式、Kolmogorov湍流大气畸变相位屏拟合能力分析.结果表明73单元变形次镜波前拟合能力较...     

静电自组装方法合成的具有多孔三维网络结构的Fe_3O_4/石墨烯复合材料作为高性能锂离子电池负极材料(英文)

采用静电自组装方法,分两步合成Fe(OH)3/GO前驱体(GO:氧化石墨烯),再通过水热反应和600°C高纯氮气气氛下煅烧,获得了Fe3O4/石墨烯复合材料.通过X射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HRTEM)、拉曼(Raman)光谱等多种分析,发现该复合材料具有三维多孔石墨烯网络结构.把合成的这种Fe3O4/石墨烯复合材料作为锂离子电池负极材料,电化学测试结果表明其具有优良的电化学性能:首次放电容量为1390 mAh·g-1,50次循环后容量为819 mAh·g-1.通过对比实验表明,三维石墨烯网络结构的形成对复合材料的电化学循环稳定性起着关键作用.     

Determination of thyreostats in urine and thyroid gland by ultra high performance liquid chromatography tandem mass spectrometry

Thyreostatic compounds could be illegally administered to animals in order to obtain a weight gain due to a higher retention of water in the edible tissue and the gastro-intestinal tract. In the European Union their use for animal production is banned since 1981. Recently a highly sensitive method exploiting the determination of thyreostats with 3-iodobenzylbromide prior to purification to determine thyreostats in urine and other matrices was reported. For the first time, the UPLC instrumentation was used to separate the 3-iodobenzyl derivatives of various thyreostats. The deuterated internal standards tapazole-d₃ and propylthiouracil-d₅ were for the first time used for the quantification of tapazole, thiouracil, methylthiouracil, propylthiouracil, phenylthiouracil and mercaptobenzimidazole. The confirmative quantitative liquid chromatographic tandem mass spectrometric (LC–MS/MS) method was validated according to Commission Decision 2002/657/EC. The decision limit (CCα) and the detection capability (CCβ) were found to be for all compounds below the recommended value of 10 μg kg⁻¹.     

Decision-making in testing process performance with fuzzy data

Over the years, numerous process capability indices (PCIs) have been proposed to the manufacturing industry to provide numerical measures of process performance. Most research efforts have focused on developing and investigating PCIs that assess process capability by precise measurements of output quality. However, real observations of continuous quantities are not precise numbers; in practice, they are more or less imprecise. Since observations of continuous random variables are imprecise the values of related test statistics become imprecise. Therefore, decision rules for statistical tests have to be adapted to this situation. This article presents a set of confidence intervals that produces triangular fuzzy numbers for the estimation of C_pk index using Buckley’s approach with some modification. Additionally, a three-decision testing rule and step-by-step procedure are developed to assess process performance based on fuzzy critical values and fuzzy p-values. This concept is also illustrated with an example for testing process performance.